Folding the grasshopper form paper

step of folding the grasshopper

1. Fold half a square of paper is prepared.

2. The paper is a right triangle and fold a half again.

3. Open up the paper and extend then press the paper to flat.

4. Will be as in the picture above.

5. And then hold back the other side.

6. The other side of paper make the same as step3

7. Fold follows the dashed line of paper then opens up.

8. Hold corner of the paper then pick up as in the picture.

9. Make of paper to blister up ther press the paper to flatly.

10. Hold back on of the paper.

11. The other side of the paper makes the same as step8.

12. Fold of paper follow dashed line on both sides.

13. Fold down the front of paper as in the picture.

14. Then fold of paper down the behind.

15. Hold the paper and Turn to change direction. (other side)

16. Then hold of paper in the middle and fold to back part.

17. Use the both hands to fold up the wings a little.

18. Then fold the legs up and down step.

19. Finally, drawing the eyes then will have the grasshopper as in the picture.

Father bantam very beautiful

Meterials required

1. Poster paper colors red,orange,and cream,dark green and light green.

2. Latex adhesive.(Glue)

3. Eakeigong size 1 cm.

Steps to do

1. Paper cut poster cream is a body one piece folder the dash.

2. Paper cut posterred is a wattle and mouth follow way each 1 piece folded the dash.

3. Paper cut poster the tail is orange inside. Poster paper and cut red the outer tail. Each 2 pieces then use a sharp-pointed. Circus cutbthe dash to be welded. Fold up and down the track.

4. Paper cut poster Dark green is into wing. And light green is using is outside each 2 pieces using a sharp-pointed. Circus cut the dash to be welded. Fold up and down the track.